Pilot burners and accessories

Der Fireye InSight 95 ist ein vielseitig einsetzbarer Kompaktflammenfühler mit vielen weltweiten Zulassungen. Die InSight 95 Flammenfühler stellen erweiterte Diskriminierungsmöglichkeiten, integrierte Flammenerkennung, Verstärkung, Sicherheitsüberprüfung und Flammenrelais in einem Gehäuse zur Verfügung. Es wird kein externes Auswertegerät (Flammenwächter) benötigt, um mit dem übergeordneten Leitsystem zu kommunizieren. Der Flammenfühler misst die Amplitude der Modulationen die in der Zielflamme auftreten (Flammen-“Flackern”).

Lichtwellenleiter Versionen sind für schwierige Sichtbedingungen optional erhältlich.

Die folgenden Insight I – Modelle sind seit dem 02. Mai 2020 abgekündigt:

Modellbezeichnung
Empfohlenes Ersatzmodell
95UVS1-1 (inklusive “E”-Versionen)
95UVS4-1WINC
95UVS1-1CG (inklusive “E” Versionen)
95UVS4-1WINC mit zugehörigem Kabel 59-497-XXX Serie
95IRS1-1CG (inklusive “E” Versionen)
95IRS4-1WINC
95UVS2-1 (inklusive “E” Versionen)
95UVS4-1WINC
95UVS2-1CG (inklusive “E” Versionen)
95UVS4-1WINC mit zugehörigem Kabel 59-497-XXX Serie
95IRS2-1 (inklusive “E” Versionen)
95IRS4-1WINC
95IRS2-1CG (inklusive “E” Versionen)
95IRS4-1WINC mit zugehörigem Kabel 59-497-XXX Serie
95UVS2-1CEX (inklusive “E” Versionen)
95UVS4-1CEX
95IRS1-1CEX (inklusive “E” Versionen)
95IRS4-1CEX
Merkmale
Modell 95DSS2(E)
Infrarotsensor
X
Infrarotsensor
X
Ultraviolettsensor
X
Fehlerrelais
X
4 – 20 mA Analogausgang
X
Modulationsfrequenzauswahl
21
Speicherdateien
4
Kommunikation
X
Autoeinstellung
X
SIL 2
X
Atex Zone 2
-1
Atex Zone 1
-1CEX

Weitere Informationen können sie der Herstellerinformation entnehmen.

Bitte sprechen sie uns bei Bedarf vor einem Geräteaustausch an.

Pilot burners

SP-32-FD

SP-32-FD

The SP-32-NG/PG-FD gas pilot burner (32 mm outer diameter, NG – natural gas or PG – propane gas, FD – forced-air) is a reliable and effective ignition source for oil and gas burners.

SP-32-ND

SP-32-ND

The SP-32-NG/PG-ND gas pilot burner (32 mm outer diameter, NG – natural gas or PG – propane gas, ND – natural draft) is a reliable and effective ignition source for oil and gas burners.

SP-48-FD

SP-48-FD

The SP-48-NG/PG-FD gas pilot burner (48 mm outer diameter, NG – natural gas or PG – propane gas, FD – forced-air) is a reliable and effective ignition source for oil and gas burners.

SP-48-ND

SP-48-ND

The SP-48-NG/PG-ND gas pilot burner (48 mm outer diameter, NG – natural gas or PG – propane gas, ND – natural draft) is a reliable and effective ignition source for oil and gas burners.

Ignition current monitoring modules

0852-24V-02

0852-24V-02

The ignition current monitoring module 0852-24V-02 enables the monitoring of the ignition of ignition transformers with 5kV, 7.5kV and 15kV with 50/60Hz (wound transformer). The ignition current monitoring is housed in an insulating case, the ignition cable is led through the case. The ignition pulses are analyzed and evaluated electronically.

As soon as the ignition pulses are detected, the monitoring relay switches. To set the appropriate switching thresholds, the customer may have to send an ignition system consisting of ignition transformer, cable and electrode to d.s.f. GmbH.

The supply voltage of the ignition current monitoring module is 24VDC.

0852-230V

0852-230V

The ignition current monitoring module 0852-230V enables the monitoring of the ignition of ignition transformers with 5kV, 7.5kV and 10kV with 50/60Hz (wound transformer). The ignition current monitoring is housed in an insulating case, the ignition cable is led through the case. The ignition pulses are analyzed and evaluated electronically.

As soon as the ignition pulses are detected, the monitoring relay switches. To set the appropriate switching thresholds, the customer may have to send an ignition system consisting of ignition transformer, cable and electrode to d.s.f. GmbH.

The supply voltage of the ignition monitoring module is 230VAC.

 

0854-24V-02

Zündstromüberwachung
0854-24V-02

The ignition current monitoring module 0854-02 enables the monitoring of the ignition of ignition transformers with 5kV, 7.5kV and 10kV with frequencies greater than 150Hz (electronic transformers). The ignition current monitoring is housed in an insulating case, the ignition cable is led through the case. The ignition pulses are analyzed and evaluated electronically.

As soon as the ignition pulses are detected, the monitoring relay switches. To set the appropriate switching thresholds, the customer may have to send an ignition system consisting of ignition transformer, cable and electrode to d.s.f. GmbH.

The supply voltage of the ignition curent monitoring module is 24VDC.

 

Ignition and ionization cables

Type 0362

  • Ignition and ionization cable
  • Cross section 1×1.5mm²
  • Test voltage 10kV
  • Temperature range -600 °C / +950 °C, briefly +1000 °C
  • For installation in protective tube
 
 
 
 

Type 0370

  • Shielded ignition and ionization cable
  • Cross section 1 x 1,0mm²
  • Operating voltage 13kV
  • Test voltage 30kV
  • Temperature range -40 °C to + 80 °C, briefly 110 °C
  • Oil and UV resistant
  • Suitable for underground installatio
 
 

Type 0371

  • Ignition and ionization cable
  • Cross section 1×1.0mm
  • Besilen with stainless steel wire braid
  • Operating voltage 16kV
  • Test voltage 20kV
  • Temperature range -40 °C to +180 °C, briefly +220 °C
  • Oil and UV resistant
  • Suitable for underground installation
 

Type 0373

  • Ignition and ionization cable
  • Cross section 1×1.0mm
  • Besilen
  • Operating voltage 16kV
  • Test voltage 20kV
  • Temperature range -40 °C to +180 °C, briefly +220 °C
  • Oil and UV resistant
  • Suitable for underground installation
 

Ignition and ionization electrodes

WWe develop and produce electrodes for the following applications:

  • High energy ignition
  • High voltage ignition
  • Ionization monitoring